Will this permitted well extraction hole be in Sec 31 or Sec 30? Well Serial #240452 ROCKING G FARMS 30H

How do you know if the section a well is drilled in is the section they will pull the gas from? The bottom hole info is blank except for the lambert numbers in Sonris?
Am I right in thinking, I would need to look those up to determine if the bottom hole is in section 31 or is there some other kind of indication that the drilling will be done in another section?
I am asking because a person told me that the pad is in 31, but they will be pulling from 30, then another told me they would eventually pull from both.

Tags: hole, permit, sonris, well

Views: 40

Replies to This Discussion

VSC,
According to sonris, this well will be drilled in Sec 31, but will drain Sec 30. If you go to sonris, and pull up the "Well Information" for that well, and scroll down the page, you will see under "Detail" that the PBHL (planned bottom-hole location) is in Sec 30. It appears that the surface is 377 feet from the north line of sec 31, and the bottom-hole location is 380 feet from the north line of Sec 30.

Another way to do it, if you want a picture, is to look on the set of options on the left-hand side of sonris, and go to "Document Images." If you enter in the well number on the top part, you will see copies of the permits and such, and those will show the surface location and bottom-hole location on a map.

Hope this helps.
Helps immensely, thanks!
I have Encanas plat for JUR RA SUG in front of me. Well 30H-1 PBHL is in Sec 30, JUR RA SUF under our land, YEA. To be drilled Well 31H-1 PBHL is in Sec. 31 under the Valerie Cardenas parcel. I assume that is you. Also, I have learned the proposed pipline that was to run N across Sec. 30 to the Harris 19 well was dropped. It is now coming from the N across Sec. 19 to Harris, where or if it goes from Harris I don't know.
Bartr
It will probably head to the east after section 19.I think that is where they hook into the "mainline." Just a guess.

RSS

Support GoHaynesvilleShale.com

Not a member? Get our email.

Groups



© 2024   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service