landowner

Walker #1H

EOG changed there mind just after premitting this well EOG said would not drill it because of results of Harvey #1(CHK's Well-their 1st Shelby well) and the Walkins #1(EOG's Well). There where problems in the completion of these wells especially the Harvey #1H. The Walker #1 now has rig drilling on it surface casing set last week 1/27/10 so maybe this shale area is still going to be OK. Good new for mineral owners around these wells. All 3 are H Shale wells

Views: 133

Replies to This Discussion

Permalink Reply by RBH on February 5, 2010 at 16:55
Was the EOG Watkins #1 permitted/drilled as a Haynesville?

landownerPermalink Reply by adubu on February 5, 2010 at 17:08
permitted as wild cat -- drilled and completed as H bossier/haynesville shale---I believe IP was around 2.5-3 mmcfd only
Permalink Reply by jffree1 on February 6, 2010 at 13:52
Petrohawk/Noble
Mary Harris #1H
12.634 MMcfd
Permalink Reply by RBH on February 6, 2010 at 14:36
for JR Ewing:
the Mary Harris #1H
Date GW Gas (MCF) Condensate (BBL) Operator Name Operator No. Field Name Field No.
Production Disposition Production Disposition
Sep 2009 233,035 233,035 114 114 NOBLE ENERGY INC 611665 CENTER (HAYNESVILLE) 16697300
Oct 2009 319,478 319,478 21 21
Nov 2009 225,453 225,453 0 0
Total 777,966 777,966 135 135
Permalink Reply by RBH on February 22, 2010 at 19:35
dec 2009 Mary Harris #1H
CARTHAGE (HAYNESVILLE SHALE) HARRIS, MARY 1H 157,225 MCF so 50% decline in 3 months from 1st month 10/2009 313478

landownerPermalink Reply by adubu on February 23, 2010 at 3:34
RBH-----did you see any production numbers on the Harvey #1H thru Dec. 09 ?? Where are you finding these production reports I don't find them on RRC Texas site unless I am just not looking in right place.
Permalink Reply by jffree1 on February 23, 2010 at 3:47
adubu, Dec. was 34,197 on Harvey 1H

landownerPermalink Reply by adubu on February 23, 2010 at 3:55
thanks jffreel----where are you finding this info please
Permalink Reply by jffree1 on February 23, 2010 at 4:02
http://webapps.rrc.state.tx.us/PR/publicQueriesMainAction.do

I use production by lease query. For wells that have a lease ID, use that number and choose "type" = Gas. If they don't have an ID # yet, use the well status (serial) # and choose Type = Pending. Be sure you choose Dist. 6 in the drop down or it will give you an error.

landownerPermalink Reply by adubu on February 23, 2010 at 4:21
jffreel----walk me thru--- found following for Harvey in drilling permit-- status # 677329 and API 419-31428 could not find lease ID #- typed in status # DIST 06--PENDING no match-- what am I doing wrong?
Permalink Reply by RBH on February 23, 2010 at 5:29
jffreel: you got ahead of me on this ONE :)..see you got the "pending"
adubu--to get pending production and production--you have to know the RRC identifier Number for the Harvey #1H=
Harvey #1H-- use the Production Reports Query option
december:
Gas 06 254406=rrc identifier # CARTHAGE, NORTH (BOSSIER SHALE) HARVEY 1H 0 0 0 34,197 34,197 02


Current Operator: CHESAPEAKE OPERATING, INC. (147715) District: 06
Field: CARTHAGE, NORTH (BOSSIER SHALE) RRC Identifier: 254406
Lease: HARVEY Gas Well #: 1H
Prod Month Range: Jun 2009 - Dec 2009 Lease Type: Gas


Showing: 1 - 7 of 7 results

Oil/Condensate (Whole Barrels) Gas/Casinghead Gas - MCF
Prod Month Commingle
Permit No. On Hand
Beginning of Month Production Disposition On Hand
End of Month Formation
Production Disposition
Volume Code Volume Code
06/2009 NOT ON SCHEDULE
07/2009 NOT ON SCHEDULE
08/2009 NOT ON SCHEDULE
09/2009 N/A 0 0 20,879 20,879 02
10/2009 0 0 0 0
11/2009 0 0 0 27,355 27,355 02
12/2009 0 0 0 34,197 34,197 02

not very good well--I will see if completion report filed
Permalink Reply by jffree1 on February 23, 2010 at 5:51
RBH, I didn't know we were competing, LOL!

RSS

© 2026   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service