Replies to This Discussion

Permalink Reply by Les Bamburg on July 6, 2010 at 2:59

Mark, yes - Forest is the furtherest south but EnCana/Shell, Comstock & Eagle have moved south also.

Forest, Olympia Minerals 7 #H1 Well, Serial #241002, S7-T7N-R13W
Forest, Olympia Minerals 17 #1 Well, Serial #241553, S17-T7N-R13W

Permalink Reply by ken hatcher on July 6, 2010 at 3:48

Mark, I agree with your logic. Still hopeful the shale extends on.

Permalink Reply by ken hatcher on July 28, 2010 at 15:44

17 leases recorded recently clerk of court (Sabine Index) in T-7, R-13W of note was sect. 4,5,16.

Permalink Reply by Jerry J. Reamer on October 9, 2010 at 8:42

Does anyone have any additional information on these two wells besides what is on Sonris?

Permalink Reply by a on October 9, 2010 at 11:23

Forest's well in section 17 was a dry hole. It has already been plugged.

Permalink Reply by ALongview on October 9, 2010 at 12:33

Are you saying they didn't go through any formations they could produce......and they drilled all the way to the Smackover? That is strange unless they ran into mechanical trouble.

Permalink Reply by ken hatcher on October 9, 2010 at 12:43

I think this is eroneous information!

Permalink Reply by ALongview on October 9, 2010 at 12:44

It looks like it didn't even spud until 7/30/2010.

Permalink Reply by a on October 9, 2010 at 13:02

They drilled to the smackover. The bossier and the haynesville did not look good enough to set pipe on the well. They plugged it and moved the rig out already. Their well in section 7 is making less than 2 million a day. It looks like the southern part of the play has been verified. They already had the pipeline is place, but they wont need it now.

Permalink Reply by ALongview on October 9, 2010 at 13:23

How do you know this.....not saying the info is wrong but Baker Hughes reported the rig on site as of yesterday?????????

Permalink Reply by Mike on December 15, 2010 at 1:48

Les, in regards to the Forest, Olympia Minerals 7 #H1 Well,Serial #241002, S7-T7N-R13W, Sonris reports the DT-1 as 1615 on a size 8 choke.What would the production be on a regular choke size and is this a Bossier or Haynesville well? The true vertical depth is 12500,measured depth is 16715.Would appreciate your take on this well.Thanks in advance.

Permalink Reply by Les Bamburg on December 15, 2010 at 4:16

Mike, because the DT-1 report did not include the flowing pressure there is not enough information to estimate the rate on a larger choke size.  I will be on the lookout for the full test results.

 

Based on the very limited information available I believe this may be a Bossier (Mid-Bossier) Shale producer.  The 12500 ft TVD was the well permit but eventually Sonris will have information regarding the actual well depth drilled.

• ‹ Previous
• 1
• 2
• 3
• 4
• Next ›
• Page