landowner

Explain these Numbers (30-13n-13w)

Hi, wondering if someone could explain these numbers: Gas Del 17676,Flow Pres 8172,Shut in 8665,Choke 18,Upper Perf 12282,Lower Perf 16485?? Good or Bad? waiting on division orders 30-13n-13w thanks

Views: 129

▶ Reply to This

Replies to This Discussion


Oil & Gas ProPermalink Reply by Les Bamburg on December 19, 2009 at 10:03
KCM, some operators are restricting production rates due to the current gas prices and in some cases a lack of adequate downstream pipeline capacity.

Oil & Gas ProPermalink Reply by Les Bamburg on December 19, 2009 at 10:00
KR, that is just a super well test. The 8172 psi flowing pressure and 18/64" choke shows this well is not flowing at full rate and would likely flow at 25 MMcfd if opened to a slighty larger choke size (22/64").

I did not realize they had finally posted some test information but Chesapeake still has not obtained an official well potential from the State. That is the reason the well does not yet have an assigned gas production allowable.

landownerPermalink Reply by k .r. hunt on December 19, 2009 at 11:38
When do they do that?(Post from the state I mean) We also noticed that there was a well completion on section 20/13n/13w 4500'MD ,what does that mean? We are watching S20,30,31,32 13n 13w.

Oil & Gas ProPermalink Reply by Skip Peel - Mineral Consultant on December 19, 2009 at 11:44
The well you mention is drilling and not yet completed. It is permitted to drill to 4500' MD (Measured Depth).

landownerPermalink Reply by k .r. hunt on December 19, 2009 at 11:46
Isn't that shallow

Oil & Gas ProPermalink Reply by Skip Peel - Mineral Consultant on December 19, 2009 at 12:00
This is not a Haynesville well. If Bengal Production has ever drilled a Haynesville well, I am unaware of it. There are a few producing gas wells in that area completed in the Paluxy formation. I suspect that is the target formation for this well. The Paluxy is a little shallower that 4500' but just because the well is permitted to that depth does not necessarily mean Bengal will go that deep.

landownerPermalink Reply by k .r. hunt on December 19, 2009 at 12:10
So are they still drilling for gas? I know nothing of the Paluxy formation.these are obviously vertical ..yes?

Oil & Gas ProPermalink Reply by Skip Peel - Mineral Consultant on December 19, 2009 at 12:15
Yes this is a vertical gas well.

landownerPermalink Reply by k .r. hunt on December 19, 2009 at 12:24
Didn't know some sections were not part of Haynesville.Looks like I need to do a little research,Thanks for info

Oil & Gas ProPermalink Reply by Skip Peel - Mineral Consultant on December 19, 2009 at 12:28
k.r. Section 20 - 13N -13W is most definitely in the Haynesville Shale Play. Not all companies and wells are targeting the Haynesville.

Oil & Gas ProPermalink Reply by Les Bamburg on December 19, 2009 at 12:23
KR that well is targetting the Mooringsport Formation.

landownerPermalink Reply by k .r. hunt on December 19, 2009 at 12:30
Ok,Your sweet to be patient with me! Never heard of Mooringsport Formation either.(Yes I'm Blonde!)

RSS

📧 Want email updates on new discussions?
Click Forum and scroll down past the last discussion and click the "Follow" button.

Top Content 

1 Haynesville Deep Phase 1 3D Seismic map

Haynesville Deep Phase 1 3D Seismic map
2 More Natural Gas for the Gulf Coast Market with Low Breakeven costs

More Natural Gas for the Gulf Coast Market with Low Breakeven costs
3 Standard Lithium vs GeoFrame vs T5

Standard Lithium vs GeoFrame vs T5
4 Billion dollar changes in the Haynesville Shale, energy prices expected to stay high

Billion dollar changes in the Haynesville Shale, energy prices expected to stay high
5 Rockcliff III Counters Haynesville Inventory Concerns with Shelby Trough Push

Rockcliff III Counters Haynesville Inventory Concerns with Shelby Trough Push
6 Request For Assistance

Request For Assistance
7 The Curious Case of SAMSON CONTOUR

The Curious Case of SAMSON CONTOUR

Groups

© 2026   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service