Austin Chalk Rapides Parish

This is my first post as a newbie. Hello to all and glad to be here. I have a small interest in Wilcox production here in Rapides Parish so I am aware of what some are doing here and one project that interests me and may interest some of you is the reentry that Addison Oil is doing or has done on their Murray 1-a, section 29 1N  2W, serial #217726.  It is a  Chalk well that I think was the discovery well for the field. Operations have ceased and all conections are complete. They had a decent flare while testing but so far nothing published. Shut in with 8k psi.

It looks to me that reentries may be a cheap way to grab some Chalk Oil.

I haven't any working knowledge of these type wells and am wondering what casing requirements are necessary. Would a 7 5/8   23#  cased hole to 11300' be a viable candidate?  

 

 

 

 

 

Thanks in advance.

Views: 334

▶ Reply to This

Replies to This Discussion


landownerPermalink Reply by Joe Aldridge on September 15, 2011 at 7:46
Yes, Could even probably drill a lateral out of 7 5/8.
Permalink Reply by jeff on September 16, 2011 at 2:00
Thanks for the reply Joe, I am thinking about using a well I have in an undrilled Chalk unit in Rapides. Wasn't real interested a year ago but now I may be able to build some interest. Any experience or data on vertical  Chalk wells in the area?

landownerPermalink Reply by Joe Aldridge on September 16, 2011 at 2:10
No, that's out of my area of interest. Go to Sonris and access the Well History by parish. They have EVERY well ever drilled in the parish listed. Good Luck...........
Permalink Reply by jeff on September 16, 2011 at 2:13
Will do.

RSS

© 2026   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service