Oil & Gas Pro

HOW TO ACCESS WELL PERMITS INCLUDING PLATS

On the main SONRIS Help Center page click on the " Louisiana Office Of Conservation Website" link. Under "Imaging" Click on "Well Records". On the "Search" page, under "Office", select "Office Of Conservation". Under "Document Type", select "Well Permit To Drill/Amend". Under "Well Serial Number", enter the Serial Number for the well. Click on "Execute Search". After opening the permit files use the arrows at the bottom of the window to select each page. The well plat is usually the last page. Good Luck.

Views: 788

Replies to This Discussion


landownerPermalink Reply by John Matherne on April 24, 2014 at 0:52

I used this to find a well plat which is helpful. I am looking for more survey information on the size and corner coordinates of the permitted well section. I am trying to overlay 3 sections on a tract of land map.

 


Oil & Gas ProPermalink Reply by Skip Peel - Mineral Consultant on April 24, 2014 at 2:46

If you use Google Earth, try Earth Point.

http://www.earthpoint.us/Townships.aspx


landownerPermalink Reply by John Matherne on April 24, 2014 at 2:50

I should have said well units and not sections.


Oil & Gas ProPermalink Reply by Skip Peel - Mineral Consultant on April 24, 2014 at 3:01

You'll need to search Field Orders which you can do in Document Access also.  You'll need the 4 digit field code.  You can find a list in the database but if you know the field or fields let me know and I'll give you the codes.


landownerPermalink Reply by John Matherne on April 24, 2014 at 3:31

Thanks Skip

I may be able to look it up now that I know to look under Field Orders.


Oil & Gas ProPermalink Reply by Skip Peel - Mineral Consultant on April 24, 2014 at 3:32

When you've got it figured out, let me know where to send the bill.  :-)


landownerPermalink Reply by John Matherne on April 24, 2014 at 3:33

Send it to Hillcorp!!!


Oil & Gas ProPermalink Reply by Skip Peel - Mineral Consultant on April 24, 2014 at 3:37

Hilcorp already knows how to use SONRIS!


landownerPermalink Reply by Seeing Wells! on February 3, 2015 at 15:43

I know I did this successfully when the directions were originally posted 10 months ago. However, I don't see the "Image" or "Well Records" etc, any more.

Has this site changed dramatically, or am I merely a dunce?

THANK YOU!


Oil & Gas ProPermalink Reply by Skip Peel - Mineral Consultant on February 3, 2015 at 15:56

SW, this discussion is five years old.  And yes the database has changed.  Use this link and then click on Document Access  then on Document Type and  then Well Permit To Drill/Amend. 

http://sonris.com/


landownerPermalink Reply by Seeing Wells! on February 3, 2015 at 16:04

Thank you, Thank you, THANK YOU, Skip! :-)

RSS

© 2026   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service