T 10 N, R 11 W, Section 21 well sight being built

Jack Blake has some land in this section and he was by there today and they are building a pad to drill a well in this section I think. It looks to be on Murray land in T10N, R11W, Section 21. I pulled up Sonris Lite and I do not see ant wells permitted in this T, R and section.

Jack has several questions as follows:

- Do they build well sites before filing a permit to drill on Sonris?

- Are they going to drill a well is this T, R and section on Murray land?

- If so any word on planned spud date?

-When will a permit to drill appear on Sonris for this?

Answers to any or all questions will be appreciated.

LONG LIVE THE HS CRIED JACK BLAKE!!!!!!!!!!!!!!!!!!!!!

Views: 47

▶ Reply to This

Replies to This Discussion

Permalink Reply by Skip Peel - Mineral Consultant on January 25, 2010 at 13:46
Jack.

- Yes. Section 21 is a SWEPI Unit. Hopefully Encana will turn out to be the operator.
- We will not know until the well is permitted. A plat giving the surface location will be included.
- No. Well, maybe, but only the operator would know that.
- Don't know. But it will show up here first (see link below). You just have to check it daily.

http://sonlite.dnr.state.la.us/sundown/cart_prod/cart_con_allpmtwels1

Good Luck!
Permalink Reply by BirdDawg, plain ole' idiot on January 25, 2010 at 14:06
Yep
Permalink Reply by jr on January 25, 2010 at 14:33
encana has also staked a well in T10N;R11W, section 27 i talked with a landowner today who has property in the well. The entrance to the well will be on the north side of Hwy 174 east of Pleasant Hill near Bruce Rd.
Permalink Reply by Teri Nelson on February 14, 2010 at 5:14
Looks as if it is Matthew Murray. Listed on permitted wells map below 1,000 feet for Sabine, DeSoto, Red River and Natchitoches . This was just added recently.
Permalink Reply by Teri Nelson on February 14, 2010 at 9:12
This should be 10,000 feet
Permalink Reply by Les Bamburg on February 14, 2010 at 5:20
Jack, see the following information:

Shell, Matthew Murray 21 #1 Well, Serial #240869, S21-T10N-R11W
Permalink Reply by Jack Blake on February 19, 2010 at 16:09
How long till this well will be ready to produce?

May Matthew Murray #21 make 15 mmcf/d cried Jack Blake!!!!!!!!!!!!!!!!!
LONG LIVE THE HS!!!!!!!!!!!!!!!!!!!!1

RSS

Support GoHaynesvilleShale.com

Top Content 

1 Haynesville Fairway could support drilling into the 2050s?

Haynesville Fairway could support drilling into the 2050s?
2 GoHaynesvilleShale.com Email Advised Me Erica Woodward Wrote On My Profile Again About Privately Contacting Me

GoHaynesvilleShale.com Email Advised Me Erica Woodward Wrote On My Profile Again About Privately Contacting Me
3 What is the meaning of a Unit Well?

What is the meaning of a Unit Well?
4 Site Not Loading Fully?

Site Not Loading Fully?
5 BPX hits it out of the park with 3 Bossier Parish CULs

BPX hits it out of the park with 3 Bossier Parish CULs
6 "Rebalancing Volumes"

"Rebalancing Volumes"
7 Chevron acquires Smackover Brine Leases in AR and E TX

Chevron acquires Smackover Brine Leases in AR and E TX

Blog Posts

Tuscaloosa Trend Sits On Top Of Poorest Neighbourhood For Decades - Yet No Royalties Ever Paid To The Community -- Why??

In researching the decades-old Tuscaloosa Trend and the immense wealth it has generated for many, I find it deeply troubling that this resource-rich formation runs directly beneath one of the poorest communities in North Baton Rouge—near Southern University, Louisiana—yet neither the university ( that I am aware of)  nor local residents appear to have received any compensation for the minerals extracted from their land.

This area has suffered immense environmental degradation…

Continue

Posted by Char on May 29, 2025 at 14:42

Not a member? Get our email.

Groups



© 2025   Created by Keith Mauck (Site Publisher).   Powered by

Badges  |  Report an Issue  |  Terms of Service