Replies to This Discussion

Permalink Reply by FXEF on October 24, 2010 at 10:28

Kay DS1,

Section 21 well was completed as a vertical and producing less than a million a day, about all it will do is hold the lease.
COMPLETED 6-7-10; GAS; HAYNESVILLE RA; 845 MCFD; 16/64 CHOKE; 1402# CP; PERFS 11,668-11,850' MD

Section 22 well was spud 9-23-2010 and well is located off Jesse Latin Road, behind the cemetery. I have not been down that way lately, and don't know what rig is drilling.

Permalink Reply by Eliza on October 24, 2010 at 14:18

FXEF - That is good news as I didn't know they spud the well in sec 22. How long do they usually take? One well in each 27 & 28 were completed months ago but waiting on the frac. Do you have an update on these? They were drilled by El Paso. I heard they were waiting on a pipeline to be completed but not sure if that is just a rumor.

Permalink Reply by FXEF on October 24, 2010 at 15:16

Eliza,

The drilling will take 40-60 days. The actual fracturing does not take but about 8-10 days, but there may a be delays due to scheduling the fracture process. It's really hard to tell, but most wells are producing with in 4-5 months of spud date.

Permalink Reply by Eliza on October 24, 2010 at 16:18

thank you so much for this update. I'm also out of town and very hard to get current information

Permalink Reply by Kay DS1 on October 25, 2010 at 13:34

Thank you so much FXEF for the updates. Do you know about the pipeline designated by El Paso? Think we read that it was going to go online the first of November.

Permalink Reply by Kay DS1 on November 2, 2010 at 9:07

Besides Sonris, is there any other site that tells what MCF a well comes in at?

Permalink Reply by FXEF on November 2, 2010 at 11:02

Kay,

There are other sites that sometimes post well completions, however they will usually get their data from SONRIS. If you are a landowner or have a royalty interest in a well, sometimes a call to the operator may get you that information.... Really depends on the operator and to whom you speak with.

Permalink Reply by Kay DS1 on November 2, 2010 at 11:30

Cool. Great info. I don't know who you are, but you seem to know a lot! Thanks.

Permalink Reply by Eliza on December 12, 2010 at 2:54

In sec 28 14n14w. Sonris list the Well Allowable as 20,350+. Does this reference the well potential? Only went to sales the end of October, so have not received payment. Also sec 27 14n14w says it's rig was "moved to Pegus 25" in November. At this time only the vertical (10,250') was complete. Why would this have happened? Will they move another rig in to complete the horizontal?

Permalink Reply by Les Bamburg on December 12, 2010 at 5:47

For the Houston 28 Well - yes that means the well tested at 20,350 Mcfd.

 

For the Houston 27 Well - yes El Paso will move a different rig on location later to drill the horizontal lateral. 

 

Permalink Reply by Eliza on December 12, 2010 at 6:13

Other wells use the same rig so why the switch? Also what is your thought about the allowable # for the 28 well?

Permalink Reply by Two Dogs, Pirate on December 12, 2010 at 9:24

Eliza you can use a smaller rig to drill the vertical hole thus save some money.

• ‹ Previous
• 1
• 2
• Next ›
• Page