Replies to This Discussion

Permalink Reply by Bernell McGehee on February 24, 2014 at 18:49

This unit includes/ the south half of Section 25 and all of sections 28 and 37 in T2N, R1E as well as the north half of Section 4 of T1N, R1E.

Trinidad Rig # 124 is doing the honors.

Permalink Reply by Skip Peel - Mineral Consultant on February 25, 2014 at 2:26

Bernell can you figure out how to link to the well file in the MSOG database?

Permalink Reply by Bernell McGehee on March 2, 2014 at 11:46

http://gis.ogb.state.ms.us/MSOGBOnline/

No...not sure it can be...

Go to the site above, type in EnCana in the find box, enter, click on oil and gas operators and EnCana, then scroll down and click on wells...list of all EnCana wells should pop up...then go to Pintard or whatever well and view whatever is on the site...warning, not much on the site and what is there is seldom current.

Permalink Reply by Skip Peel - Mineral Consultant on March 2, 2014 at 11:53

Thanks.  I'll see what I can do.

Trinidad Drilling Rig #124 reports 17 Days Drilling Ahead, 2/28/14.

Permalink Reply by Bernell McGehee on March 2, 2014 at 11:50

As of Friday, February 28, drilling at roughly 11,000' with no issues...preparing to start curve.

Permalink Reply by Skip Peel - Mineral Consultant on March 7, 2014 at 16:28

Trinidad Drilling Rig #124 reports 24 Days Drilling Ahead, 2/7/14.

Permalink Reply by Bernell McGehee on March 7, 2014 at 19:13

As of Friday, March 7, at 12,200'. 

Intermediate casing installed to 9,800'. 

Seemed to be circulating and discussing next steps.

Permalink Reply by rodney e. fortenberry III on March 14, 2014 at 16:01

  I have received no information from any companies other than on this website.Should i contact Encana or what. Have interest  in Section 25 E 1/2 of SW 1/4, SE 1/4, S 1/2 of S 1/2 of NE 1/4     and Section 28, NE 1/4 of NE 1/4 all in T2N, R1E. Any help would be greatly appreciated.

Rodney E. Fortenberry III

Permalink Reply by Bernell McGehee on March 14, 2014 at 18:50

Are you leased?

Permalink Reply by Skip Peel - Mineral Consultant on March 15, 2014 at 1:17

Trinidad Drilling Rig #124 reports 31 Days Drilling Ahead, 3/14/14

Permalink Reply by rodney e. fortenberry III on March 15, 2014 at 3:42

yes to encana

Permalink Reply by Bernell McGehee on March 15, 2014 at 8:45

Short response: 

They aren't going to contact you until there is production from the well.

Long answer:

When you signed the lease, you placed EnCana in charge of your oil and gas minerals. 

They will contact mineral owners they have NOT leased from and surface owners of the pad and surface owners of the necessary access.

If/when this well begins producing you will likely receive a division order which will show your ownership in the unit.  You will be asked to acknowledge the correctness of their numbers.  If you agree, you will shortly receive a check around the 25th of the second month after the first month of production. 

If you don't agree, things will slow down until everyone gets happy.

Personally I'm under (very small ownership) a couple of wells that were drilled at about the same time. 

I attempted to contact EnCana before the wells were brought in to explain a change in ownership since the lease was signed and couldn't get anywhere until the wells were actually in production.

• ‹ Previous
• 1
• 2
• Next ›
• Page