Replies to This Discussion

landownerPermalink Reply by Bobi Carr ("parker") on September 16, 2009 at 14:43

#239822 says that the Measured depth is 16797 and the True vertical depth is 11842.

16797 - 11842 = 4955 feet (just 325' short of a section line).

I thought the maximum frac lenght for one section was (5280 - 660 feet) 4620 feet.

Is this unit larger than 640 acres?

What am I missing?

• ▶ Reply

landownerPermalink Reply by Bobi Carr ("parker") on September 16, 2009 at 14:44

Will they just start the frac further along the horizonal leg of the well?

Do I have the numbers correct?

• ▶ Reply

landownerPermalink Reply by Bobi Carr ("parker") on September 16, 2009 at 14:47

The main question is ARE THEY IN THE PROCESS OF MOVING THE RIG TO ##239789.

• ▶ Reply

Oil & Gas ProPermalink Reply by The_Baron on September 17, 2009 at 3:27

It is my understanding that they intend to get both wells drilled and frac during the christmas break.

• ▶ Reply

landownerPermalink Reply by Mac Davis on September 16, 2009 at 18:14

The surface well is in the next section. This could explain it. You might only have 4620 or less perforated section of the lateral. You can also get more than 4620 if the well doesn't run parallel to the section line, but this one looks pretty close to N/S.

• ▶ Reply

Oil & Gas ProPermalink Reply by The_Baron on September 17, 2009 at 3:17

Parker, we had a big discusion about this several weeks ago when the drilling started. HK has permitted two wells. Sam Grayson owns land in both adjoining sections. Each well will have a surface location in the adjacent section, drilled into the other section. If you look at the well plats you will see what I am talking about.

• ▶ Reply

Oil & Gas ProPermalink Reply by The_Baron on September 17, 2009 at 3:24

See if this helps, I color coded the wells.

• ▶ Reply

landownerPermalink Reply by Bobi Carr ("parker") on September 17, 2009 at 7:49

Baron,

Yes. I understand. But my main question was what happened to the rig.

It is back up.

I thought some of them could "walk" short distances.

Have they been drilling long enough to have completed the first well and are now drilling the second one.

• ▶ Reply

Permalink Reply by Buddy on September 17, 2009 at 8:45

Parker: Am almost certain the rig was up this morning coming to work and know for sure that it was at noon. Not sure what is happeneing - I have been told it is a new, highly addvanced rig and it may be one they can "scoot" over. Doesn't seem like it has been on the site long enough to have completed the horizontal.

• ▶ Reply

landownerPermalink Reply by Bobi Carr ("parker") on September 17, 2009 at 8:50

I saw it today too.

I thought it could "scoot" or "walk" too. That is why I was so surprised when I didn't see it yesterday.

• ▶ Reply