Can someone translate this to english? This is in Eola S6- T2S- R3E
| UTMX 83 | UTMY 83 | LONGITUDE 83 | LATITUDE 83 |
|---|---|---|---|
| 575313.04042349 | 3419601.13706432 | -92.21187413 | 30.90735907 |
BOTTOM HOLE COORD
| EFFECTIVE DATE | END DATE | PLUGBACK TOTAL DEPTH | TRUE VERTICAL DEPTH | MEASURED DEPTH | LAT DEG | LAT MIN | LAT SEC | LONG DEG | LONG MIN | LONG SEC | COORDINATE SOURCE | LAMBERT X | LAMBERT Y | ZONE | COORDINATE SYSTEM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 07/22/2011 | 8900 | 0 | 0 | 0 | 0 | 0 | 0 | 02 |
WELL HISTORY
| SERIAL | WELL NAME | WELL NUM | ORG ID | FIELD | ST CD | PT | WELL CLASS | EFF DATE | END DATE | STAT DATE |
|---|---|---|---|---|---|---|---|---|---|---|
| 243577 | R R IRION | 001 | S229 | 3648 | 01 | 00 | 07/22/2011 | 07/22/2011 |
SCOUT INFO
| REPORT DATE | WELL STATUS | MEASURED DEPTH | TRUE VERT DEPTH | DETAIL |
|---|---|---|---|---|
| 08/08/2011 | 05 | 8900 | DRLD T/ 8900'; REVIEWING CORES; | |
| 08/02/2011 | 05 | 3760 | DROVE 16" T/ 40'; SPUD 7/28/11; RAN 8-5/8" T/ 1537' & CMT W/ 455 SXS; TSTD BOPS 7/30/11; DRLG @ 3760'; (BOP INFO: SHAFFER LWS, 11", 3000 PSI); | |
| 07/22/2011 | 01 | 8900 | S 24 D 03' 33" W - 19,908.04' FROM NGS MONU. "865" IN SEC 6. |
Views: 256
Replies to This Discussion
-
Permalink Reply by Skip Peel - Mineral Consultant on -
07/22/2011 - S24 D 03' 33" W - 19,908.04' FROM NGS MONU. "865" IN SEC 6. -Permitted date and surface location in degrees, minutes, seconds from a Monument located in Section 6.
08/02/2011 - DROVE 16" T/ 40'; SPUD 7/28/11; RAN 8-5/8" T/ 1537' & CMT W/ 455 SXS; TSTD BOPS 7/30/11; DRLG @ 3760'; (BOP INFO: SHAFFER LWS, 11", 3000 PSI); - Drove 16" surface casing to 40', Drill bit hit the dirt on 7/28/11, Ran 8 5/8" casing to 1537' and cemented with 455 sacks; Tested Blow Out Preventers on 7/30/11, Drilling @ 3760'; Blow Out Preventer specs.
08/08/2011 - DRLD T/ 8900'; REVIEWING CORES; Drilled to 8900', took a core sample.
IANAD. Disclaimer: I An Not A Driller. LOL!
-
Permalink Reply by Les Bamburg on
-
Skip, the 16" would be the conductor pipe while the 8 & 5/8" would be the surface casing.
By the way NGS is National Geodetic Survey.
-
Permalink Reply by Skip Peel - Mineral Consultant on
-
Thanks, Les. In what situations are NGS monuments utilized?
-
Permalink Reply by Craig Wascom on
-
Good lesson Skip
-
Permalink Reply by W Sharp on
-
How can a location be 19,908.04 feet from a monument located in Sect 6 and still be in Section 6? It is a pretty much standard section 1 mile by 1 mile. And thanks for the reply.
-
Permalink Reply by Robert on
-
Monuments are used in land surveying. It would be used for section control.
-
Permalink Reply by Skip Peel - Mineral Consultant on
-
Sorry for not being more specific. Yes I understand the use of monuments in land surveying. I am wondering why the usual surface location description based on distance from section lines is replaced with this description utilizing the monument.
-
Permalink Reply by P.G. on
-
Well that monument is roughly 3+ miles away ...that couldn't have been in the same section..
-
Permalink Reply by Two Dogs, Pirate on
-
A lot of the wells in South Louisiana use this type of description. The monument isn't in Section 6 it is somewhere else.
-
Permalink Reply by FXEF on
-
Skip,
I think they use the NGS monuments in south Louisiana because of the irregular sections.
-
Permalink Reply by Skip Peel - Mineral Consultant on
-
That would be a good reason. I was also wondering whether there might be historic Arpent tracts with a standard governmental section overlay.
-
Permalink Reply by FXEF on
-
The reason South Louisiana has irregular sections is that the arpent land grants were treated and numbered as PLSS sections. I have not seen any PLSS theoretical sectioning overlays for South Louisiana. At this point it would most likely be confusing and conflict with old records.
Support GoHaynesvilleShale.com
Top Content
Blog Posts
The Lithium Connection to Shale Drilling
Shale drilling and lithium extraction are seemingly distinct activities, but there is a growing connection between the two as the world moves towards cleaner energy solutions. While shale drilling primarily targets…
ContinuePosted by Keith Mauck (Site Publisher) on November 20, 2024 at 12:40
Not a member? Get our email.
Groups
-
Franklin County, Texas
9 members
-
Cass County, TX
120 members
-
Rusk County
97 members
-
Livingston Parish, LA
34 members
-
San Augustine, TX
386 members
-
Miller County, Arkansas
27 members
-
Sabine Parish, LA
455 members
-
South Caddo Parish Group
440 members
-
Natchitoches Parish
400 members
-
Bienville Parish, LA
244 members
© 2024 Created by Keith Mauck (Site Publisher).
Powered by
