Replies to This Discussion

Permalink Reply by Hydrocarbonite on November 7, 2019 at 13:03

Why are there no responses to this very direct question?  Where are all the experienced voices of expertise in the O&G industry?

Where hv they gone?? And why?  

Permalink Reply by Chopman on November 8, 2019 at 6:53

It is normal to drill a 12 1/4" hole when you are going to set 9 5/8" casing.  This casing program allows them to run an additional 7 5/8" casing/liner if they get in trouble in the Chalk.  This well should be salvageable,  they will have to sidetrack and run casing and then drill on to their target.  It will definitely be an additional expense, but it is likely that the well is not lost.

Permalink Reply by David Crockett on November 8, 2019 at 7:27

Thanks for the knowledgeable answer!!  Good to hear it could be salvageable!

Permalink Reply by Hydrocarbonite on November 8, 2019 at 9:32

Yes thx for your input Chopman

Permalink Reply by Skip Peel - Mineral Consultant on January 4, 2020 at 12:07

Crosby 10 #1 was reported 80 days drilling ahead @ 21,100' on 1/3.  Should be nearing  or at TD this weekend.

Permalink Reply by David Crockett on January 15, 2020 at 6:44

an entry was made on this well 1/13  "ream lateral to 22360'; tooh; pickup 5 1/2" Pkr & sleeveliner; tih to 22,342; w/liner

Permalink Reply by David Crockett on January 21, 2020 at 7:33

Another new entry on the Crosby well today January 21,2020

Permalink Reply by David Crockett on January 23, 2020 at 7:44

This well had a casing test and a directional survey added to the documents listed- entered today.  You can access it by clicking on the well number above.  Sorry, I don't have a clue what any of it means.  Maybe some of you professionals could shed a little light.

Permalink Reply by David Crockett on January 23, 2020 at 10:19

Thanks Jay. I appreciate your input

Permalink Reply by Lisa Melder-Johnson on January 23, 2020 at 16:27

Thanks Jay!  Is this the same as with the SN 251809 Crowell well, waiting on flow rate reports after fracking complete?  This takes several months after drill completed right?

Permalink Reply by Skip Peel - Mineral Consultant on January 25, 2020 at 4:43

Ensign US Drilling Rig #777 reported the Crosby 10 #1 as 101 days drilling ahead @ 22,360' on Friday, 1/24.

Permalink Reply by Bob Zimmerman on January 25, 2020 at 14:15

This well is inside the greater Masters Creek fairway sweet spot which had good wells and some absolute flops. It lies between Glenmora, LA and somewhere to the west that has never been established. To the west along the Beauregard-Vernon parish lies what appears to be the downdip Sugartown and Chasmore fields. This is the play that broke CHK. But interesting enough, CHK was promoting it as a Tuscaloosa gas play at the time. Go figure.

• ‹ Previous
• 1
• 2
• 3
• 4
• …
• 6
• Next ›
• Page