|SERIAL||WELL NAME||WELL NUM||ORG ID||FIELD||PARISH||PROD TYPE||SEC||TWN||RGE||EFFECTIVE DATE||API NUM|
|252648||AUS C RA SUS;CROSBY 33 H||001||P5184||6565||40||00||033||01N||04W||01/28/2021||17079205510000|
|PRMT DATE||SPUD DATE||STAT DATE||ST CD|
WELL SURFACE COORDINATES
|Surface Longitude||Surface Latitude||Lambert X||Lambert Y||Ground Elevation||Zone||Datum|
WELL SURFACE COORDINATES GENERATED BY DNR
|UTMX 83||UTMY 83||LONGITUDE 83||LATITUDE 83|
BOTTOM HOLE COORD
|EFFECTIVE DATE||END DATE||PLUGBACK TOTAL DEPTH||TRUE VERTICAL DEPTH||MEASURED DEPTH||LAT DEG||LAT MIN||LAT SEC||LONG DEG||LONG MIN||LONG SEC||COORDINATE SOURCE||LAMBERT X||LAMBERT Y||ZONE||COORDINATE SYSTEM|
|SERIAL||WELL NAME||WELL NUM||ORG ID||FIELD||ST CD||PT||WELL CLASS||EFF DATE||END DATE||STAT DATE|
|252648||AUS C RA SUS;CROSBY 33 H||001||P5184||6565||01||00||01/28/2021||01/28/2021|
|REPORT DATE||WELL STATUS||MEASURED DEPTH||TRUE VERT DEPTH||DETAIL|
|01/28/2021||01||21761||294' FSL & 802' FWL OF SEC 33-T1N-R4W. PBHL: 2577' FSL & 800' FWL OF SEC 28-T1N-R4W.|
Ensign rig 777 reported 15 days drilling ahead @ 13,797' on 4/1.
TVD as per permit is 14.700' - probably have started drilling curve to get set for the lateral part of the hole.
Thanks for the updates, Skip and Rockman
You're welcome, David.
Ensign rig 777 reported 22 days drilling ahead at 14,487' on 4/9.
Less than 700' of progress in past week - either a lot of tripping to change out bottom hole assemblies to drill the curve or one heck of a lot of problems.
A lot can happen when you are three miles down in in the oil field
Maybe taking cores or logging?
Perhaps logging and then running casing. And swapping out drilling fluid (water base to oil base)?
Next week's report will say a lot about how they are doing
Just checked the details in SONRIS - as of 4/1 report, they had already set 7" casing and swapped out to OBM and were drilling ahead in the curve to get to the lateral.
So only less than 700' in a week means (to me) that they are having some issues out there.
Ensign rig 777 reported 29 days drilling ahead at 15,326' on 4/16.
839' in a week - way slow / should be in the horiztonal part of the hole.
Good hz drilling progress is 1000'+ per day
Ensign rig 777 reported 36 days drilling ahead at 18,780' on 4/23. 3000' to go if drilled to permitted MD.